Re: [IRCA] Housing the RF-Space SDR-IQ

["Mauno Ritola" <Mauno.Ritola@xxxxxxxxxxxxxxx>]

> 1.  The SDR-14 does require a separate 12v supply.  The SDR-IQ runs off 
> the
> USB connection power.

For this reason SDR-IQ requires USB 2.0 while SDR-14 works via USB 1.0. A 1 
GHz Pentium 2 or better is recommended in SpectraVue manual.

SDR-14 shows the whole 30 MHz, while SDR-IQ can show only 190 kHz spectrum. 
Recording and playback is limited to 190 kHz in both.

73, Mauno


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx