[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] New Grayland SDR WAV Files



Hi Guy,

Thanks for the info. Mine is modified also and I've noticed some improvement beyond longwave as well. So, appreciate the clarification. It was Bjarne's report that convinced me to do the modification. Thanks also for posting the files!

Also, thank you Chuck for your reply to my question. Had I not stumbled across Bjarne's report as well as some traffic concerning this on the Airspy list I would have assumed the benefit was mainly for the lofers. I think the added improvement above the BCB was a surprise, a pleasant one, to a lot of folks!

73 to all,

Ken
Lummi Island, WA

Guy Atkins wrote on 9/2/2018 10:59 PM:
Hi Ken,

Good question! I forgot to mention that my HF+ SDRs have the "R3 bypass
mod" as well as latest firmware installed. The designers of the HF+
expected hobbyists and experimenters to configure and modify the antenna
input characteristics, so they made it easy with a larger SMD chip
capacitor in-line to the HF antenna input. (Despite being called R3 it is
actually a resistor.) Changing or bypassing this part affects the impedance
curve of the radio, if I remember right.

Initially thought to only help out long wave, it actually gives a decent
boost to medium wave sensitivity too, all the way up to 15 MHz per some
reports. Top DXer Bjarne Mjelde, among others, has confirmed the R3 bypass
improvements-- see his review of the HF+ here:
https://app.box.com/s/d2dni57dzrsxgs38gxbbfz9gm26brqpk

The last few firmware updates resulted in even better RF overload
performance on the HF+, and this on a radio which was already receiving
accolades for excellent strong signal handling.

73,

Guy Atkins
Puyallup, WA



_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx