[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IRCA] VACTROL build parts list -



I have had 3 or 4 requests for VACTROL sets -

Here is an approximate break down of the main parts which brings
me to the price for a set for those interested.

Aluminum Box (for indoor controller)  - $9.00
Binding Posts (for antenna end box) $6.00
Plastic case for outdoor antenna termination box - $5.00
BNC Connector X 2 - $8.00
10-turn Bournes vernier - $17
10-turn Bournes 500 ohm or 1000 ohm POT - $17
Power jack for wall wart - $2.00
Opti-Isolator - $12.00
V- Regulator - $2.00
Circuit boards - $3.00
Assorted resistors, capacitors, POWER LED and diodes - $2.00

*Wall-Wart and BNC terminated coaxial cable not included.*

That is 83 dollars (Canadian) [your lucky day folks to the South!]

I'd say that since we are a family, I am not going to attach any labor or
assembly costs -- so I am prepared to price these at *$85 (US)*
*shipping included* (if the shipping is around $15 or so...)

For those interested (there were 3 or 4...) send me your opinion on this.
I think I have 3 sets made already and circuit boards for 3 more sets to
populate
and I can order more circuits from OSH PARK in a heart beat.

-- 
Colin Newell - Editor and creator *of *Coffeecrew.com
<http://www.Coffeecrew.com> and DXer.ca <http://www.DXer.ca> -
VA7WWV | Twitter @CoffeeCrew | Victoria - Canada
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx