[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Phasing Question
Hi,
Regarding phasing longwires, what arrangement works the best regarding
placing the wires; at 90 degree angles to each other, parallel to each
other, or some other orientation and if someone doesn't mind, please clue me
in on the pros and cons of the various models of phasers used for longwires.
Kenneth
----- Original Message -----
From: "Patrick Martin" <mwdxer@xxxxxxxxx>
To: "Neil Kazaross" <neilkaz@xxxxxxxxxxxxx>; "Mailinglist for the
International Radio Club of America" <irca@xxxxxxxxxxxxxxxx>
Sent: Saturday, December 27, 2008 6:44 PM
Subject: Re: [IRCA] Phasing Question
In the early days of my experimenting with phasing, I found phasing my
old 3 foot Sanserino loop and the SW EWE, gave me poor results. Better
than nothing, but phasing two wires does work better, especially for
deep nulls.
73,
Patrick
Patrick Martin
KGED QSL Manager
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the
original contributors and do not necessarily reflect the opinion of the
IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.0/1866 - Release Date: 12/27/2008
8:49 PM
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx