[IRCA] New Palstar tunable ferrite loop on their webpage

["Steve Ratzlaff" <steveratz@xxxxxxxxxxxx>]

> From a note posted today on the yahoo Palstar group, the new LA-30 tunable 
ferrite loop is now listed on the Palstar webpage. 
http://palstar.com/la30.php There's a preliminary manual and schematic you 
can download, and some pictures. A MW loop head is standard with extra-cost 
optional LW and low-HF loop heads. No length for the ferrite rod is given 
but comparing with the 8.25" wide enclosure, the rod looks to be around 5-6" 
long. No tilting of the loop head, just the usual horizontal rotation. An 
internal picture shows a very large tuning capacitor; the schematic says 
it's 1100 pF.
"Only" $329 for this unit with the MW loophead, and $60 each for the two 
optional loop heads.
(I wonder how Gary's Slider ferrite rod compares--my bet is on the Slider, 
which seems to be a longer (more sensitive) ferrite rod compared to the 
Palstar's. With a little effort one could make LW and HF Slider rods as 
well.)

Steve




_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx