Re: [IRCA] Part 15: an explanation (and loopholes?)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Part 15: an explanation (and loopholes?)



Hey Y'all.....go to QRZ.com....and fill in the call : N4ES....in the upper 
left box and click on it. Bill runs a neat 10 meter beacon that steps the 
power down from 20 wts  to 2 wts. to 200 mw to 20 mw.....you can read all 
the details on it on his QRZ page. I've heard all 4 tones here several 
times....yes, 1/50 of a watt can be heard many miles away.   73, Chris 
K4NHL  S.C.
----- Original Message ----- 
From: "Joe Miller, AB8YP" <ab8yp@xxxxxxxxx>
To: "Mailing list for the International Radio Club of America" 
<irca@xxxxxxxxxxxxxxxx>
Sent: Thursday, July 19, 2007 12:22 PM
Subject: Re: [IRCA] Part 15: an explanation (and loopholes?)


> Mr. Taylor,
>
> I agree with you. It's my understanding though that
> the 100 mw is measured at a distance of 30 meters from
> the antenna. Depending on the loss of signal strength,
> output power at the antenna can be compensated.
>
> On a side note, I know of a ham operator within
> 200-400 miles of me who took an old CB radio,
> converted it to transmit on ten meters, and uses it
> for a CW beacon with one watt of power. How far does
> the signal go? I heard it from my home....
>
> 73 de Joe (AB8YP)
>
>
> --- Charles A Taylor <MWDXer@xxxxxxx> wrote:
>
>> At 03:18 AM 7/19/2007 -0400, you wrote:
>> >If it's Part 15, it's limited to 100MW ERP from
>> each transmitter into a 3
>> >meter antenna.. otherwise it isn't legal.
>>
>>
>> Paul,
>>
>> What Part 15 says is that the D-C input into the
>> final shall not exceed
>> 100 mW*, not 100 mW ERP. Also, the total length of
>> the antenna, feedline
>> and ground connection shall not exceed 3 meters.
>>
>> * You mean mW=milliwatts. MW=megawatts!
>>
>> Effectively, that means the final is going to be
>> VERY close to the
>> antenna. Reading the "letter of the law," I see no
>> averse language
>> that prohibits a complete radial system. THAT would
>> make a BIG
>> difference in a 100 mW's reach/coverage.
>>
>> Also, since the D-C input is fixed at 100 mW, I see
>> no averse
>> language that limits the R-F input to the final to
>> any level.
>> That means, for example, if one uses a grounded-grid
>> or grounded-base
>> final, if driver feeds 50 mW into the final it will
>> also appear in the
>> output for a total of 150 mW!
>>
>> It looks legal to me.
>>
>> Our barn has a galvanized roof and years ago I took
>> the time and trouble
>> to bond the sheets together.I also put up a 10-foot
>> mast atop the center
>> of the roof.
>> But I never carried through and put a 100-mW
>> transmitter up there. I
>> may go berzerk and put the mast back up and try a
>> small BC station or
>> beacon.
>>
>>
>> >Meaning, they can synch more then one transmitter
>> together as long as none
>> >of the individual transmitters exceed 100MW ERP
>> with a 3 meter antenna
>>
>> Got that right!
>>
>> Charles
>>
>>    Charles A Taylor, WD4INP
>>
>>   Greenville, North Carolina
>>
>>
>> _______________________________________________
>> IRCA mailing list
>> IRCA@xxxxxxxxxxxxxxxx
>> http://montreal.kotalampi.com/mailman/listinfo/irca
>>
>> Opinions expressed in messages on this mailing list
>> are those of the original contributors and do not
>> necessarily reflect the opinion of the IRCA, its
>> editors, publishing staff, or officers
>>
>> For more information: http://www.ircaonline.org
>>
>> To Post a message: irca@xxxxxxxxxxxxxxxx
>>
>>
>
>
>
>
> ____________________________________________________________________________________
> Get the Yahoo! toolbar and be alerted to new email wherever you're 
> surfing.
> http://new.toolbar.yahoo.com/toolbar/features/mail/index.php
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the 
> original contributors and do not necessarily reflect the opinion of the 
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
> 

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx