[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] âRe: Wellbrook Large Aperture Loop Antenna ALA100LN
- Subject: Re: [IRCA] âRe: Wellbrook Large Aperture Loop Antenna ALA100LN
- From: Les Rayburn <les@xxxxxxxxxxxxxxxx>
- Date: Tue, 2 Feb 2016 22:22:29 -0600
- Delivered-to: archive@xxxxxxxxxxxxxxxxxxxx
- Delivered-to: irca@xxxxxxxxxxxxxxxx
- Dkim-signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=highnoonfilm.com; s=default; h=To:References:Message-Id: Content-Transfer-Encoding:Date:In-Reply-To:From:Subject:Mime-Version: Content-Type; bh=tOGEBglmBOZpcFSsBInxsFBaaiUOsUp2JqMYHks2CyM=; b=CSvwX1WS5kqu BSaW1yHNqihLgbwlTgcKt2dkg/Bn/JM2hwTMpyRmzrptRODgS3QQKcElxxLuxa2zsSTjA0u8/yoM3 vaBHF/k/emooQeBkF1J706/6Zy67RibD7TGZ8KH4uXhL5RVhEbaer47czlfwFLfPm6axw+uncFyrt oE0xs=;
Based on Guyâs EZNEC modeling Iâve decided to get a FLG100LN-2 instead of the ALA100LN. I already have a flag constructed, and itâs mounted alongside my wooden privacy fence to favor the Western US. Since âKâ calls from the West are my primary interest, it makes sense to keep a uni-directional antenna, instead of converting it to bi-directionalâespecially since it seems it would be easy to make it bi-directional should the need arise in the future.
Canât wait to try it.
73,
Les Rayburn, director
High Noon Media Services
130 1st Avenue West
Alabaster, AL 35007-8536
205-621-7500
205-621-7505 FAX
205-253-4867 CELL
highnoonfilm.com
[This message and any attached documents contain information from the sender that may be confidential and/or privileged. If you are not the intended recipient please notify the sender immediately by reply e-mail and then delete this message. Thank you.]
> On Feb 2, 2016, at 7:49 PM, Guy Atkins <dx@xxxxxxxxxxxxx> wrote:
>
> âYes, the ALA100LN may be Wellbrook's "jack of all trades" in my opinion.â
> Also up for consideration though is the FLG100LN. A pair of deltas with
> these modules also make an excellent phased system in a reasonable amount
> of space (40m separation is recommended) compared to a Beverage's space
> requirements. Of course, you can phase the ALA100LNs also.
>
> The Wellbrook phaser works well with very little tweaking needed across the
> MW band, once phase and gain are set. Other phasers can work but will need
> readjustment every 100-200 kHz or so. Wellbrook's phaser is best for
> broadband SDR recording with a phased loop array.
>
> âHmm... I just took a look at Wellbrook's web site, and the phasers are
> nowhere to be found. Perhaps they'll still offer them by special order?â
>
>
> A friend of mine who does considerable EZNEC modeling âhas shown that the
> FLG100LN can also work well in "zero ohms" mode (i.e., no termination
> resistor) and essentially becomes a bidirectional loop as with the
> ALA100LN. Wellbrook doesn't advertise the FLG100LN for use without
> termination, but the computer models and actual testing reveal this extra
> benefit.
>
> 73,
>
> Guy Atkins
> Puyallup, WA
>
>
> ââ
>
>
>>
>>
>> ---------- Forwarded message ----------
>> From: "Paul B. Walker, Jr." <walkerbroadcasting@xxxxxxxxx>
>> To: Mailing list for the International Radio Club of America <
>> irca@xxxxxxxxxxxxxxxx>
>> Cc: "National Radio Club NRC am@nrcdxas_org" <am@xxxxxxxxxxx>
>> Date: Tue, 2 Feb 2016 14:20:52 -0900
>> Subject: Re: [IRCA] Wellbrook Large Aperture Loop Antenna ALA100LN
>> Les, on Collin Newells recommendation I will be buying a Wellbrook loops
>> the ala100ln I think even.... You'll like it I think
>>
>> Paul
>>
>>
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx