[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IRCA] Clifton Labs Z10040A / B



Nick, I have a superloop of 20' x 40' and a dkaz of 21' x 84'. I am using a
homebrew amp now, but it has too much gain and overloads with images from 3
local stations on some frequencies.. The clifton labs amp gets my interest
mainly because of the low price vs a wellbrook amp.   Jim

>
> Message: 3
> Date: Sat, 02 May 2015 13:56:47 +0000
> From: Nick Hall-Patch <nhp@xxxxxxxx>
> To: Mailing list for the International Radio Club of America
>         <irca@xxxxxxxxxxxxxxxx>
> Subject: Re: [IRCA] Clifton Labs Z10040AClifton Labs Z10040A
> Message-ID: <20150502135649.A6E625D30@xxxxxxxxxxxxxxxxxxx>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> I think Clifton Labs sells the Z10040B now Jim.   As amplifiers go, I
> suspect you won't get much better than this one, very well specified
> and tested.  But for best results, you'll want to provide it with 50
> ohm input and 50 ohm output; the latter could be a 50 ohm attenuator
> pad if you have gain to spare.
>
> What is you exact application?   Tuned passive loop antennas for
> example rarely have a 50 ohm output.
>
> best wishes,
>
> Nick
>
>
> At 11:10 02-05-15, you wrote:
> >I am looking to add an amplifier to some of my mw loop antennas and would
> >like to know if anyone is using the Clifton Labs Z10040A and how well it
> >performs.  thanks   Jim
> >_______________________________________________
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx