Re: [IRCA] Crate Loop - now updated on DXer.ca!

[satya@xxxxxxxxxxxx]

Hey Chris:

Hope it works out well!  I have noticed that the 7600GR is a tad more
sensitive when placed along the inside wall of the crate for some reason,
even though the tuning sharpness of the loop goes down quite a bit.

Kevin S
Bainbridge Island, WA


> I started building this project and found the exact crate at Home Depot
> for
> $4.88. Its size alone is sufficient enough for coupling with the 7600. So
> I
> only bought one.
>
> At the rate I'm going the crate will serve two purposes: 1. As an air-core
> loop to couple to the Sony 7600 and 2. To hold all my earthly possesions
> once my wife kicks me out for getting "little white burrs" all over her
> floor...hi. **Wishes I had a table saw like Kevin**
>
> 73.
>
> Chris
> Fort Lupton, CO
>
>
>
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
>
>

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx