Re: [IRCA] Crate Loop - now updated on DXer.ca!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Crate Loop - now updated on DXer.ca!



I started building this project and found the exact crate at Home Depot for
$4.88. Its size alone is sufficient enough for coupling with the 7600. So I
only bought one.

At the rate I'm going the crate will serve two purposes: 1. As an air-core
loop to couple to the Sony 7600 and 2. To hold all my earthly possesions
once my wife kicks me out for getting "little white burrs" all over her
floor...hi. **Wishes I had a table saw like Kevin**

73.

Chris
Fort Lupton, CO



_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx