[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Reversible Super Loop

Precisely! When the termination is the same value as the opposite end (the radio feed) you will find your deepest null; best directionality.
A good place to start if you don't want to screw around all day is to use an 800 to 900 ohm resistor as the null.
BUT since I'm not a SuperLoop user these resistance values may not be the best; if so, someone else will chime in. 


Regards,

Mark Durenberger
-----Original Message----- From: Donald Barnes via IRCA 
Sent: Wednesday, September 07, 2016 8:40 AM
To: Mailing list for the International Radio Club of America
Cc: Donald Barnes
Subject: Re: [IRCA] Reversible Super Loop

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Be sure to register now for the Joint DX Convention
Kansas City, September 9 to 11.  Hotel space is filling up.
Registration info:
http://www.nrcdxas.org
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers 

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Be sure to register now for the Joint DX Convention
Kansas City, September 9 to 11.  Hotel space is filling up.
Registration info:
http://www.nrcdxas.org


Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx