[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] â"Science Fiction PL-380"-- Pest Control Version



<<<ÂÂ Wishful thinking, I guess, Gary. ÂNow, is there a simple way of converting 
the failed FSL/FLG 100 combo to the traditional setup? ÂIs it simply a 
matter of switching out the FLG and replacing it with a variable capacitor? 
ÂÂ73,...WaltÂÂ >>> 
 
Yes, conversion back to a tunable FSL model would be easy-- by replacement of the FLG100 with a tuning capacitor. But if you really want to transform the antenna into aÂhot little performer I would recommend replacementÂof the 660/46 Litz wire with the ultra-sensitive new 1162/46 wire. This is the Litz wire used on all the recent Oregon Cliff DXpedition FSL antennas. 
73, Gary 
 

----- Original Message -----

From: "Walter Salmaniw" <canswl@xxxxxxxxx> 
To: "Mailing list for the International Radio Club of America" <irca@xxxxxxxxxxxxxxxx> 
Sent: Saturday, January 23, 2016 10:19:11 PM 
Subject: Re: [IRCA]ÂÂÂÂÂÂÂÂâ"Science Fiction PL-380"-- Pest Control Version 

Wishful thinking, I guess, Gary. ÂNow, is there a simple way of converting 
the failed FSL/FLG 100 combo to the traditional setup? ÂIs it simply a 
matter of switching out the FLG and replacing it with a variable capacitor? 
ÂÂ73,...Walt 

On Sun, Jan 24, 2016 at 3:48 AM, <d1028gary@xxxxxxxxxxx> wrote: 

> Hi Walt, 
> 
> <<< Â Fellas, I'm interested again with the removal of the variable tuning 
> capacitor and use for broad spectrum Perseus SDR captures. ÂAs you recall, 
> a number of these early large units were kindly built by Gary. ÂOne was 
> sent my way (and I may have the same in Masset). ÂResults have been 
> variable. ÂWould anything different be done with these units compared to 
> what we know today? Â >>> 
> 
> Thanks for your comments. 
> 
> Although these hard-wired FSL antennas perform exceptionally well in the 
> PL-380 model, they can do this only because the radio has a Silicon Labs' 
> Si4734 DSP chip with an antenna-tuning function. Whenever the DXer changes 
> frequency the DSP chip automatically responds by peaking sensitivity for 
> the new frequency, eliminating the need for the DXer to peak a variable 
> capacitor (as with traditional FSL antennas). 
> 
> Since the Perseus-SDR and other spectrum capture receivers don't have 
> this critical component, hard-wiring those 7" FSL antennas into their 
> circuitry wouldn't really accomplish anything (except maybe melting down 
> the Perseus' front end with an RF overload). The hard-wired FSL's do behave 
> somewhat like broadband antennas in the PL-380, but that's only because of 
> the DSP chip's antenna tuning function. The combination essentially becomes 
> single-optimized frequency reception from 531-1701 kHz, selectable by the 
> DXer. 
> 
> 73, Gary 
> 
> 
> 
> ----- Original Message ----- 
> 
> From: "Walter Salmaniw" <canswl@xxxxxxxxx> 
> To: "Mailing list for the International Radio Club of America" < 
> irca@xxxxxxxxxxxxxxxx> 
> Sent: Saturday, January 23, 2016 5:52:37 PM 
> Subject: Re: [IRCA] Â Â Â Ââ"Science Fiction PL-380"-- Pest Control Version 
> 
> Fellas, I'm interested again with the removal of the variable tuning 
> capacitor and use for broad spectrum Perseus SDR captures. ÂAs you recall, 
> a number of these early large units were kindly built by Gary. ÂOne was 
> sent my way (and I may have the same in Masset). ÂResults have been 
> variable. ÂWould anything different be done with these units compared to 
> what we know today? Â 73,...Walt 
> 
> On Sun, Jan 24, 2016 at 12:37 AM, <d1028gary@xxxxxxxxxxx> wrote: 
> 
> > Hi Guy, 
> > 
> > Thanks for your comments. 
> > 
> > <<< Â I'm still puzzled as to the best way to go for nulling of pests, 
> > regarding 
> > diameter vs length proportions. Initially the "long and skinny" antennas 
> > such as in the SRF-T615 were praised for their nulling, but now the 
> > "stubby" FSLs appear to have the upper hand. Â Â>>> 
> > 
> > Guy, there's no doubt that the stubby, hard-wired FSL's have really 
> > created a new level of nulling capability-- in an entirely different 
> league 
> > than the loopsticks or long ferrite rods that preceded them. There are 
> two 
> > primary reasons for this. The new hard-wired FSL's are completely 
> isolated 
> > away from the radio circuitry, and they have no variable tuning capacitor 
> > to upset their RF symmetry. They present a completely symmetrical RF coil 
> > for reception purposes, which can null out pest stations under 
> > laboratory-perfect conditions every time. All of the preceding antenna 
> > designs were limited either by surrounding radio circuitry, a variable 
> > tuning capacitor to upset the RF symmetry, or both. 
> > 
> > <<< Â I guess this is an unfair apples to oranges comparison (hollow FSL 
> vs 
> > traditional solid rod antenna). To compare FSL to FSL then, are you 
> finding 
> > better nulling the "stubbier" you make the antennas? Â >>> 
> > 
> > Yes, there is now no doubt that the shorter and stubbier a hard-wired FSL 
> > coil becomes, the greater its nulling capability will be-- so long as the 
> > RF design is completely isolated , and completely symmetrical. 
> > 
> > <<< Â Do you recall the large diameter, short rod FSLs that Kevin 
> > Schanilec built 
> > inside of Christmas wreath containers? I wonder if those models were 
> > excellent at nulling. I do remember that he did a lot of his testing 
> > indoors, which can screw up nulls and reception completely. High 
> > performance ferrite antennas CANNOT be reliably evaluated indoors! Â Â>>> 
> > 
> > All traditional FSL's (including Kevin's designs) have a variable tuning 
> > capacitor-- which is a distraction from a perfectly symmetrical RF 
> > reception pattern. The larger and clunkier the variable capacitor, the 
> > worse and worse the nulling capability gets. Long hookup wires to a 
> > variable cap also upset the symmetrical RF reception pattern, further 
> > reducing nulling capability. The new hard-wired FSL's avoid both issues 
> > completely-- with perfect symmetry and no variable tuning capacitor. 
> > 
> > By the way, all of the local pests except for 1450-KSUH have been nulled 
> > down into the noise. My guess is that the over-modulated KSUH is 
> > broadcasting on more frequencies than its fundamental, making it tough to 
> > null each one :-) 
> > 
> > 73, Gary 
> > 
> > 
> > 
> > 
> > 
> > ----- Original Message ----- 
> > 
> > From: "Guy Atkins" <dx@xxxxxxxxxxxxx> 
> > To: "Mailing list for the International Radio Club of America" < 
> > irca@xxxxxxxxxxxxxxxx> 
> > Sent: Saturday, January 23, 2016 3:02:59 PM 
> > Subject: Re: [IRCA] Â Â Â Ââ"Science Fiction PL-380"-- Pest Control 
> Version 
> > 
> > > 
> > > âGary, 
> > > 
> > 
> > âI'm still puzzled as to the best way to go for nulling of pests, 
> regarding 
> > diameter vs length proportions. Initially the "long and skinny" antennas 
> > such as in the SRF-T615 were praised for their nulling, but now the 
> > "stubby" âFSLs appear to have the upper hand. 
> > 
> > Do you think the cylindrical (hollow) design of the FSLs changes the 
> > response to a groundwave pest station so that a high diameter-to-length 
> > ratio *FSL* nulls better than a *solid* rod with a high 
> LENGTH-to-diameter 
> > ratio? 
> > 
> > I guess this is an unfair apples to oranges comparison (hollow FSL vs 
> > traditional solid rod antenna). To compare FSL to FSL then, are you 
> finding 
> > better nulling the "stubbier" you make the antennas? 
> > 
> > Do you recall the large diameter, short rod FSLs that Kevin Schanilec 
> built 
> > inside of Christmas wreath containers? I wonder if those models were 
> > excellent at nulling. I do remember that he did a lot of his testing 
> > indoors, which can screw up nulls and reception completely. High 
> > performance ferrite antennas CANNOT be reliably evaluated indoors! 
> > 
> > 73, 
> > 
> > Guy Atkins 
> > Puyallup, WA 
> > 
> > > â 
> > > 
> > > 
> > > ---------- Forwarded message --------- 
> > > From: d1028gary@xxxxxxxxxxx 
> > > To: Mailing list for the International Radio Club of America < 
> > > irca@xxxxxxxxxxxxxxxx> 
> > > Cc: 
> > > Date: Sat, 23 Jan 2016 13:40:28 +0000 (UTC) 
> > > Subject: [IRCA] 
> > > ââ 
> > > "Science Fiction PL-380"-- Pest Control Version 
> > > Hello All, 
> > > 
> > > The first of the new hard-wired FSL models specifically designed to 
> have 
> > > an unusually sharp nulling capability is now a reality. With a "short 
> and 
> > > stubby" FSL design that emphasizes symmetry, isolation and a tidy RF 
> > > reception pattern, this model can put all of my semi-locals (Seattle 
> and 
> > > Tacoma) down in the noise-- and even receive a few competing stations 
> on 
> > > their fundamental frequencies. Using 22 of the commonly available 
> Russian 
> > > surplus 62mm x 12mm x 4mm bars, this model is one of the "spinoff" 
> > versions 
> > > of the 3" Bar FSL PL-380 model (for which the 15-page "Heathkit-like" 
> > > construction article was posted at 
> > > http://www.mediafire.com/view/w0gcek56f6aq7kr/3_Inch_FSL_Tecsun_PL.doc 
> > > Â), and has an FSL "sensitivity score" (coil diameter x ferrite length) 
> > of 
> > > 264-- pretty close to the 300 point score of the article version (with 
> > > 100mm ferrite bars). The advantage of this model is that there is a 
> huge 
> > > supply of the Russian surplus 62mm ferrite bars, currently sold on eBay 
> > by 
> > > two different sellers. You can get 20 of them for $13-- including 
> > shipping 
> > > from Lithuania. 
> > > 
> > > Construction of this model is identical to the article version, except 
> > for 
> > > the FSL construction (which may be added as an addendum). All of the 
> > > construction parts are readily available, also. Unless you live 
> > practically 
> > > next door to a local pest, this "pest control" model should cut 
> > > your offenders way down to size. A photo of the new model is posted at 
> > > https://app.box.com/s/5r95oxc9v24vm9hbpe2w1g800lbt4d3b 
> > > 
> > > 73 and Good DX, 
> > > Gary DeBock (in Puyallup, WA, USA) 
> > > 
> > > 
> > > 
> > _______________________________________________ 
> > IRCA mailing list 
> > IRCA@xxxxxxxxxxxxxxxx 
> > http://montreal.kotalampi.com/mailman/listinfo/irca 
> > 
> > Opinions expressed in messages on this mailing list are those of the 
> > original contributors and do not necessarily reflect the opinion of the 
> > IRCA, its editors, publishing staff, or officers 
> > 
> > For more information: http://www.ircaonline.org 
> > 
> > To Post a message: irca@xxxxxxxxxxxxxxxx 
> > 
> > 
> > _______________________________________________ 
> > IRCA mailing list 
> > IRCA@xxxxxxxxxxxxxxxx 
> > http://montreal.kotalampi.com/mailman/listinfo/irca 
> > 
> > Opinions expressed in messages on this mailing list are those of the 
> > original contributors and do not necessarily reflect the opinion of the 
> > IRCA, its editors, publishing staff, or officers 
> > 
> > For more information: http://www.ircaonline.org 
> > 
> > To Post a message: irca@xxxxxxxxxxxxxxxx 
> > 
> > 
> _______________________________________________ 
> IRCA mailing list 
> IRCA@xxxxxxxxxxxxxxxx 
> http://montreal.kotalampi.com/mailman/listinfo/irca 
> 
> Opinions expressed in messages on this mailing list are those of the 
> original contributors and do not necessarily reflect the opinion of the 
> IRCA, its editors, publishing staff, or officers 
> 
> For more information: http://www.ircaonline.org 
> 
> To Post a message: irca@xxxxxxxxxxxxxxxx 
> 
> 
> _______________________________________________ 
> IRCA mailing list 
> IRCA@xxxxxxxxxxxxxxxx 
> http://montreal.kotalampi.com/mailman/listinfo/irca 
> 
> Opinions expressed in messages on this mailing list are those of the 
> original contributors and do not necessarily reflect the opinion of the 
> IRCA, its editors, publishing staff, or officers 
> 
> For more information: http://www.ircaonline.org 
> 
> To Post a message: irca@xxxxxxxxxxxxxxxx 
> 
> 
_______________________________________________ 
IRCA mailing list 
IRCA@xxxxxxxxxxxxxxxx 
http://montreal.kotalampi.com/mailman/listinfo/irca 

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers 

For more information: http://www.ircaonline.org 

To Post a message: irca@xxxxxxxxxxxxxxxx 


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx