Re: [IRCA] Antenna Phaser/Combiner article

["John H. Bryant" <bjohnorcas@xxxxxxxxxxxxxx>]

Craig,

Thank you very much.  The article was quite clear and I could follow 
it all to make one of these for myself.... The only omission that I 
could see was a description of the balun at the vertical.  could you 
give us a description of that... core material/size, etc and turns count??

Thanks!

John Bryant




At 11:32 AM 12/13/2008 -0500, you wrote:
> I posted the article on the simple antenna phaser and combiner setup today
> at the AM-DX.COM site.  This has been one of the most effective nulling
> arrangements I've ever used for indoor and portable reception.  It is
> especially good for knocking down nearby strong locals.  Most times they can
> be nulled into the noise.  At the 550 transmitter site, I was able to null
> the 550 station down enough to listen to either 540 in Long Island or 560 in
> Springfield, MA.  That was parked about 100' from the tower with a kilowatt
> running normal modulation on 550.  Since it's passive, there is no spur or
> intermodulation generation from this either.
>
> Hope it's useful...
>
> Craig Healy
> Providence, RI
>
>
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the 
> original contributors and do not necessarily reflect the opinion of 
> the IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx