[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Electrical QRM question
It sounds like the QRM is coming from a defective device with digital
control logic. The device enters a state that causes QRM, then when you turn
power off then on, it resets the device back into a known good state. Or, it
could be the defective device's power supply.
Next time the QRM happens, power off a section of your house at a time while
monitoring the QRM. When you find the circuit the offending device is on,
you narrowed down your search. Or, you could unplug everything in your house
one device at a time while monitoring the QRM. 73.
Chris Knight
Fort Lupton, Colorado
I once again experienced massive buzzing all around the house. It seemed
stronger near various things like lights and light switches, etc... and
when I turned off the main power switch and then turned it back on, the
noise went away. This happened last time, a few months ago, too, and the
same trick worked.
My question is - for anyone here who knows about such things - what might
be going on to cause the QRM, what am I doing when turning the main power
off and then back on, and most importantly is there anything I should be
telling my elecrician?
Saul
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx