[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Housing the RF-Space SDR-IQ
- Subject: Re: [IRCA] Housing the RF-Space SDR-IQ
- From: cafe@xxxxxxxxxxxxx
- Date: Tue, 2 Oct 2007 21:17:37 -0700
I have a robust nibbler tool but I did not opt to use it.
I used a variety of fine files and a drill press with
a wide index variety to cut away what I needed and file the
rest - it allowed me to be a bit more artistic.
And yes - I cut away enough of the length that the LED's
sit within about 2mm of the front fascia.
Ironically, most of the cutting time was spent
on the DB9 (male) Serial jack -- which I ended up
"blocking" for aestetics.
--
Colin Newell - Editor/Creator coffeecrew.com | dxer.ca
Web-Design / E-Commerce / Writing
Victoria, British Columbia, Canada
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx