Re: [IRCA] Alaskans/EWE Antenna plans

["CHARLES HUTTON" <charlesh3@xxxxxxx>]

Patrick:

Dunno what the others are doing but I prefer to phase the west (rather than 
SW) Beverage against the NW Beverage. There's less trouble from the 
broadside Californians that way.


Chuck


>From: mwdxer@xxxxxxxxx (Patrick Martin)
>Reply-To: Mailing list for the International Radio Club of 
>America<irca@xxxxxxxxxxxxxxxx>
>To: irca@xxxxxxxxxxxxxxxx (Mailing list for the International Radio Club 
>ofAmerica)
>Subject: Re: [IRCA] Alaskans/EWE Antenna plans
>Date: Sun, 16 Oct 2005 22:43:50 -0700
>
>Bruce,
>
>With you guys phasing the NW beverage against the SW beverage at
>Grayland to get your lobe to Alaska, I have decided to install my 2nd
>EWE. I am not sure I can get the same length (22X100X22) as the other
>one, but I do see at least 20X50X20 is possible, but this time aimed at
>330 degrees. Anchorage is at 324 and Fairbanks at 333. This should be
>interesting to try. If it works, it would give  from probably the lobes
>to about the Yukon to New Zealand.  I am not sure how a 20X50X20 EWE
>would work compared to my longer one to the SW.
>
>73,
>
>Patrick
>
>Patrick Martin
>Seaside  OR
>KAVT Reception Manager
>
>_______________________________________________
>IRCA mailing list
>IRCA@xxxxxxxxxxxxxxxx
>http://arizona.hard-core-dx.com/mailman/listinfo/irca
>
>Opinions expressed in messages on this mailing list are those of the 
>original contributors and do not necessarily reflect the opinion of the 
>IRCA, its editors, publishing staff, or officers
>
>For more information: http://www.ircaonline.org
>
>To Post a message: irca@xxxxxxxxxxxxxxxx
>


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://arizona.hard-core-dx.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx