[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] The VACTROL progress



--- Begin Message ---
Steve Byan's original version Vactrol circuit used for Beverages can be adapted for Ewes.


http://www.w0btu.com/Remote_Beverage_termination_control.html


The trick is that the Ewe element would need to be redone with a two-conductor wire such as lamp cord, twisted pair, or speaker wire.


Mark Connelly, WA1ION
South Yarmouth, MA


<<
Patrick:


You can't use Colin's box. Modifications would have to be made to it and to your transformer box. Perhaps the next version of Colin's box will have a bit of flexibility.
I'd scrap the EWE: it has by far the poorest antenna pattern in the EWE-Flag-Pennant-Delta (Kaz) group. Plus, it's ground dependence means a bit of change to the termination as seasons vary the soil characteristics.
Wet soil doesn't generate voltages all by itself. It might corrode things, but that's a different story.


Chuck


________________________________________
From: IRCA <irca-bounces@xxxxxxxxxxxxxxxx> on behalf of Patrick Martin <mwdxer@xxxxxxxxx>
Sent: Sunday, March 6, 2016 5:49 PM
To: IRCA
Subject: Re: [IRCA] The VACTROL progress


Chuck and Colin,


So it looks like the best way is not to use this for the EWE the way it is designed? I may have to build a different antenna, one that is floating, a K9AY, a Flag, or a KAZ antenna? Any form of a "loop" is my best antenna to use? I was concerned about any form of voltage/current in the ground. Our soil is swampy and very wet most of the year. The grounding always enhances the TP reception here, so I like to use it. John Bryant and I always used to discuss that, as in OK it never made any difference.
My EWE's are all Ground connected. At the far end is a control (2-3K pot) that runs between a series of ground rods and the end of the EWE for termination. I peak the pot for a null and leave it.




Patrick


Patrick Martin
Seaside OR
KGED QSL Manager


> From: coffeecanuck@xxxxxxxxx
> Date: Sat, 5 Mar 2016 22:00:57 -0800
> To: irca@xxxxxxxxxxxxxxxx
> Subject: Re: [IRCA] The VACTROL progress
>
> Mark Connelly or one of the guru's likely has a better answer - I have been using a very vanilla arrangement with the power coax going directly to the termination -
> I do not think you could run the ground side of the connection via ground rods if that is what you are suggestion - at least with the 9-10 V source from my Vactrol supply.
>
> Colin Newell - CoffeeCrew.com - VA7WWV - Victoria - BC
>
> > On Mar 5, 2016, at 8:37 PM, Patrick Martin <mwdxer@xxxxxxxxx> wrote:
> >
> > Colin,
> >
> > As you know I am going to be using this on a EWE, with one side of the control to a series of ground rods and the other to the end of the EWE. Does this matter? There may be some current in the ground as the soil is so wet here and I live next to a swamp. I plan a new Western EWE at 20X115X20 in the backyard and I will be using the Vactrol there.
> > On another note, I have that SW EWE I have had since 1981. I cannot run a cable through the land over to the end of it because in the Winter often the wire would be under 2-3 feet of wire as it is a swampy cattle raising field. Now, I wonder if I could attach a wire to the EWE and follow the end down to the far end, getting the power to it? I could avoid running wire through the lake out there in the Winter, also the cows could not step on it. But would the extra power cable running next to the EWE affect the operation of it? Any thoughts from anyone
> > I am hoping the the new Western EWE will rival the SW EWE, as getting to the termination of the SW is not as easy as it once was with the electric fencing and all.
> > Thanks.
> >
> >
> > Patrick
> >
> > Patrick Martin
> > Seaside OR
> > KGED QSL Manager
> >
> >> Date: Sat, 5 Mar 2016 17:01:10 -0800
> >> From: coffeecanuck@xxxxxxxxx
> >> To: irca@xxxxxxxxxxxxxxxx
> >> Subject: [IRCA] The VACTROL progress
> >>
> >> I have had around 9 orders or so for VACTROL sets --
> >>
> >> Went out and spent around $500 for parts on Friday -
> >>
> >> If anyone is interested in a bit more info on what they are and what they
> >> do,
> >> head over here -
> >> http://www.dxer.ca/index.php/our-stuff/19-vactrol-for-the-dxer
> >>
> >> This article will grow a little every day.
> >>
> >> Many thanks for the advance orders on these units - will knock them off as
> >> fast as possible.
> >>
> >> --
> >> Colin Newell - Editor and creator *of *Coffeecrew.com
> >> <http://www.Coffeecrew.com> and DXer.ca <http://www.DXer.ca> -
> >> VA7WWV | Twitter @CoffeeCrew | Victoria - Canada
>>

--- End Message ---
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx