[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IRCA] 3.7 Inch "Baby FSL" Receives S9+ TP-DX



Hello All, 
 
The new-design 3.7" FSL is one of several experimental models being tested in an effort to design low cost, high performing models for the MW-DXing community. The 3.7 inch FSL is of a very tiny size (a photo is posted at https://app.box.com/s/e8pv0rh2ydoeyu6rjqewjc8yq3dsd2kr Â), but it uses the highest sensitivity Litz wire available on the commercial market (1162/46). This is the same high-sensitivity Litz wire used in the monster FSL models on Oregon cliff DXpeditions. The 3.7" Baby FSL is designed to be constructed for under $100 in parts, but it packs a veryÂpowerful performance punch in its tiny size. 
 
After completion of the first test model this morningÂthe antennaÂwas tested out in the reception of 1566-HLAZ at 1507, and received this Japanese service signal at an S9+ level on the CC Skywave (as shown in the photo linked above). Without the FSL antenna boost theÂUltralight radio had no reception of HLAZ at all. 
 
 https://app.box.com/s/8e2c7wuiw8tldq3ov9f3etqrw0jdzjxw 
 
73 and Good DX, 
Gary DeBock (in Puyallup, WA, USA) 
7.5" loopstick CC Skywave Ultralight + 
3.7 inch "Baby FSL" 
 
 
 
 
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx