[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] SDR-Console and the Perseus SDR Volume Levels
- Subject: Re: [IRCA] SDR-Console and the Perseus SDR Volume Levels
- From: Don Moman VE6JY <ve6jy.1@xxxxxxxxx>
- Date: Tue, 25 Feb 2014 19:02:11 +0000
There is a volume tab in the SDR Console next to the speaker icon in the
VFO pane. Even tho it says 75 the actual level may be anything - it is just
an icon.
Using the native Perseus software recording is 1600 khz maximum - it
records what you have the screen width set to.
73 Don
VE6JY
On Tue, Feb 25, 2014 at 5:49 PM, Les Rayburn <les@xxxxxxxxxxxxxxxx> wrote:
> Got the new Perseus SDR hooked up and running last night using SDRV4.1
> downloaded from the Perseus web site. No problems at all with the initial
> installation on Windows 7 Pro. Had it working within moments.
>
> One issue I did notice was that when I used the Perseus with the
> SDR-Console software, the AF output volume was much lower compared to the
> native Perseus software. No idea why this would be, and couldn't find a
> place to adjust the level inside the SDR-Console software. Can someone
> offer assistance?
>
> RF levels appeared to be the same for both software.
>
> So far, I love the Perseus! One other question--how much bandwidth can the
> Perseus record in I/O mode? I've seen some sites that say it's limited to
> 800 KHz, others say 1600 KHz, and others 2 MHz. My understanding is that it
> would cover the entire AM band, which would be 1710 KHz (1.7 MHz)
>
>
> --
> 73,
>
>
> Les Rayburn, N1LF
> Maylene, AL
> EM63
>
> Member NRC, IRCA, & Medium Wave DX Circle
> Former CPC Chairman for NRC/IRCA
>
> SDR-IQ,Funcube Pro, Wellbrooke ALA-1530+ loop, LF Engineering Active Whips,
> Quantum Phaser, Kiwa Loop, Palstar MW Pre-Selector
>
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
>
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx