Re: [IRCA] Noisy Modem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Noisy Modem



Craig,

Radio Shack had small chokes but they want $10 a piece for them and the salesman said he doubted they would work. I guess I could mail order for toroids. Any suggestions on size? I can run over to Home Depot and probably find metal screening. That is a great idea. Ground the screening to the coax connector on the modem, or run a separate ground from under the house? Thank.

73,

Patrick

Patrick Martin
Seaside OR
KGED QSL Manager

> From: bubba@xxxxxxxxxxxxxxxxxxxx
> To: irca@xxxxxxxxxxxxxxxx
> Date: Thu, 17 Oct 2013 07:39:35 -0400
> Subject: Re: [IRCA] Noisy Modem
> 
> > Tonight I did a bit of experimenting and wrapped the Internet/phone  Modem 
> > in
> > tin foil and the noise cut down75%, at least. I did not wrap it too well, 
> > but
> > the plastic box is covered in holes for air as it does get warm. But maybe 
> > I
> > could get a metal box and put air holes in it and see if that would shield 
> > it.
> > Too bad is does get warm, but maybe there is hope after all.
> 
> Try using metal screen as what is used in windows.  Lets air through but 
> blocks noise.  Also, see if the cables in/out can be wrapped in a toroid. 
> That blocks RF on the outside of the cables.
> 
> Craig Healy
> 
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
> 
> Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
> 
> For more information: http://www.ircaonline.org
> 
> To Post a message: irca@xxxxxxxxxxxxxxxx
> 
 		 	   		  
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx