[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] PL-606 LW/MW plug-in antenna mod?
- Subject: Re: [IRCA] PL-606 LW/MW plug-in antenna mod?
- From: d1028gary@xxxxxxx
- Date: Fri, 29 Apr 2011 21:19:13 -0400 (EDT)
Hi Stephen,
In answer to your question, the PL-606 has an external FM-SW antenna
jack which can presumably be rewired like the Laurie Mann modification
to the PL-310, allowing the use of external AM plug-in antennas to
replace the stock loopstick. But since nobody (that I'm aware of) has
done this modification yet on the PL-606, it's unlikely that you'll
find any documentation for the procedure. The MW and LW 7.5" plug-in
loopsticks that I've designed for the PL-360 model use the radio's own
plug-in loopstick jack, and although these antennas will work well with
any Tecsun DSP Ultralight model, the PL-606 would need something like
the Laurie Mann modification before these or any other external AM
antennas could be plugged into the radio. A serious time crunch here
(finishing up the LW plug-in loopstick orders and other antenna
projects) makes it tough to take on any new projects like this
currently.
73, Gary DeBock (in Puyallup, WA)
-----Original Message-----
From: Stephen Airy <pianoplayer88key@xxxxxxxxx>
To: irca <irca@xxxxxxxxxxxxxxxx>
Sent: Fri, Apr 29, 2011 2:42 pm
Subject: [IRCA] PL-606 LW/MW plug-in antenna mod?
Hi all (especially ULR tinkerers)...
I have my Tecsun PL-606 open, as I had to replace a broken whip
antenna, and while I have it open I figure I may as well modify the
FM/SW plug to also accept LW/MW antennas. I know there have been a
couple PDFs published detailing how to do it with the PL-390 and the
PL-310, and someone has said it can be done with the PL-606 as well,
but I haven't been able to find instructions for that model.
Does anyone by any chance have any photos showing what connections I
would need to make / reroute, or are there any instructions somewhere
detailing how to do that with the PL-606?
Also I know someone on the yahoo ultralightdx group sometimes will make
antennas for DXers (when he doesn't run out of materials or time :) )
but are there instructions posted somewhere for how to make my own
antenna? (I think he's mentioned an LCR meter used for something while
making them, but I don't have one, and if I was going to get one
wouldn't want to spend more than about $10-20 or so.)
TIA & 73
Stephen
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the
original contributors and do not necessarily reflect the opinion of the
IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx