Re: [IRCA] Phasing /RF notch, etc.

["Craig Healy" <bubba@xxxxxxxxxxxxxxxxxxxx>]

> Maybe your problem is with 300 feet of coax. I have never used that long
> a run. All mine are 50-80 feet. Have to tried out shorter runs to see if
> you get the pickup?

The coax is 150'.  I was counting the distance to the dummy load and back
again.  300' of wire total.  Four ohms seems reasonable for that run, so the
shield must be intact.  And, the wire was brand new and only rolled out a
couple of times.

I have tried shorter runs, and the ingress is less.  Separation required for
the two loops to phase is about 150', so..

Other ways to connect the loops to the phaser are being considered.

Craig Healy
Providence, RI

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx