[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Phasing /RF notch, etc.
- Subject: Re: [IRCA] Phasing /RF notch, etc.
- From: "Craig Healy" <bubba@xxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 17 Sep 2007 21:12:21 -0400
- Organization: Hazzard gang
> I don't much leakage any longer with the chokes I added thanks to the
> great help of John Bryant. They have really knocked down the stray
> signals. The directivity of the antennas are much better. I notice the
> WNW EWE even gets TAs better now.
> Have you tried chokes on your coax? It sure worked for me.
I made up a choke with around 18 turns of RG-58 on a very large FT-290-75
core. Made no difference at all. Added grounds, nada. My next work will
be to fine-tune the CAT5 balanced wire. I think that has the greatest
potential short of some sort of solid outer conductor coax. Were it a fixed
installation, I certainly would use that. Wouldn't work for a temporary
setup..
> I think with the Welbrook you can use either 2 or 4 loops. If you use
> two, both are set the same direction (E-W or N-S). The other two are set
> the opposite if I understand it corectly. The only issue for most people
> is the distance they have to be placed apart, 40 meters. I don't know
> how well they would work if placed closer together, but even here I
> could get the 40 Meter spacing running them E/W, but it would take a bit
> more extending the coax.
I have no trouble with the 40m spacing. I usually set antennas up at a 150
foot distance or more. Once I get caught up from the vacation, I'll work on
things. I really think the phased loops have a huge potential, maybe more
so that a BOG. Just a matter of chasing out the dratted ingress of signals.
That's the spoiler.
Craig Healy
Providence, RI
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx