[HCDX] Kaz Antenna article by John Bryant

[Mark Connelly <MarkWA1ION@xxxxxxxxxx>]

Greetings to all.  I have web-posted John Bryant's
excellent write-up of the "Kaz antenna" which
was developed by renowned medium wave DXer
Neil Kazaross.  It is a "squashed delta" variant
of the K6SE delta, a broadband terminated loop
somewhat akin to the Pennant, Flag, K9AY, and
Ewe receiving antenna designs used widely by
many radio amateurs and by a large number of
elite medium wave (AM broadcast band) DXers
who specialize in hearing foreign stations.

The article is available in Adobe Acrobat
PDF format at the following URL:
"http://members.aol.com/DXerCapeCod/kaztests.pdf"; .

A segment of John's message inserted after mine
here explains things a bit more.

Enjoy !

Mark Connelly, WA1ION - Billerica, MA, USA

==========================================

From: "John Bryant" <bjohn@xxxxxxxxxxxx> 
Subject: New Antenna Article 

Fellas, 

Here is another article, this one testing the "KAZ" series of antennas 
which Neil Kazaross and I have been working on for the past 6 weeks or so. 
The KAZ (my name for it, not Neil's) was developed by Neil, using EZNEC 
antenna modeling software and building on the work of K6SE in developing a 
series of Flag and Pennant antennas.  All of K6SE's were optimized for 160 
meters. Neil's contribution was in changing K6SE's classic equilateral 
delta  shape to a "squashed delta" with an aspect ratio of  1 to 4. This 
odd shape gives much better F/B ratios at the arrival angles typical of 
medium wave than does the classic equilateral delta.  Neil (and my) first 
model, the "KAZ" is only 10' high x 40' wide and does a VERY good job. Neil 
went that small to try to develop a design for a typical urban situation 
and one that might even be erected in some attics or on some roof tops. The 
"Super KAZ" is 28' x 112'. 

These antennas are much cheaper and easier to build than the K9AYs and can 
be made for under US $10, if you wind your own toroid-based impedance 
transformer. Unlike most of my articles, its OK to put this one directly on 
the web Because of the low cost and the fact that the antenna, unlike the 
EWE and K9AY are independent of ground, I think that many MW DXers will be 
quite interested.  Please feel free to use this article in any venue! 

I plan a "quick and dirty" small article on winding your own toroidal-based 
impedance matchers to be a follow-on to this article. That piece should be 
along in a week or so.

John Bryant 







_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/


_______________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://www2.hard-core-dx.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

Copyright (c) Hard-Core-DX.com

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Text. A copy of the license is available in http://www.gnu.org/copyleft/fdl.txt.

All the other copyright notices are VOID.