Re: [IRCA] [ABDX] FS DX-302

[Ira Elbert New III <ien3@xxxxxxxxxxx>]

I have no idea what to offer, but like a lot of folks, I could always use another radio. :)

Bert New

Sent from my iPhone

> On Mar 12, 2014, at 11:43 AM, "T. Hills" <thills@xxxxxxxxxxxxx> wrote:
> 
> I have a DX-302 on the bench in the process of being refurbished and 
> thought I'd offer it to interested groups before putting it on Ebay. The 
> case is in very good condition with some silver paint rubbed off on the 
> bottom of the front panel.
> 
> I'm waiting on a couple electrolytics to finish recaping it and right 
> now it's "factory" other than stiffening the power supply. Without mods 
> and after alignment it's more sensitive than my factory R-71A on the 
> lower bands and less so above 15MHz which is typical for a 302. I've 
> rewound T206 on my 302 and it perked up the upper frequencies quite a bit.
> 
> There are a number of mods that could be done easily since it's already 
> opened up and I would do them for a buyer at little or no cost.
> 
> If you plan on using it mostly for MW/LW there are front end, audio and 
> AGC mods that I've found work very well on my personal 302 and would do 
> at no cost, some others are a real PITA and I'd have to charge a bit for 
> them.
> 
> I anyone is interested email me off list.
> 
> Tim Hills
> Sioux Falls, SD
> 
> __._,_.___
> Reply via web post	 Reply to sender	 Reply to group	Start a New Topic	Messages in this topic (1)
> The ABDX website www.abdx.org!
> VISIT YOUR GROUP
> • Privacy • Unsubscribe • Terms of Use 
> .
>  
> __,_._,___
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx