Re: [IRCA] WG2XFQ on 486Khz....

[Brett Saylor <bds2@xxxxxxx>]

If you missed it last night and want to try again, Brian is apparently
keeping the transmitter on another night, as I can hear it on my south
loop,

Brett Saylor
State College, PA
On Sun, Dec 30, 2012 at 11:52 PM, Brett Saylor <bds2@xxxxxxx> wrote:

> All,
>
> Brian, WA1ZMS, in Forest VA plans to re-run a replica of Reginald
> Fessenden’s first aural transmission on New Year’s Eve; he first ran the
> transmission on 486 kHz this past Christmas eve under the WD2XSH/31
> experimental call sign, and I was able to hear the broadcast in
> Pennsylvania. Please see the forwarded email below for the details of his
> New Year's Eve transmission. Brian is active in 600 meter experimental
> work and collects early wireless gear. You can see the transmitter that
> Brian uses at this URL: http://w4dex.com/500khz/wd2xsh31.htm
>
> If you do log his station, I am sure he would appreciate a report.
>
> 73,
>
> Brett Saylor
>
>
> ---------- Forwarded message ----------
> From: Brian, WA1ZMS <wa1zms@xxxxxxx>
> Date: Sun, Dec 30, 2012 at 11:14 PM
> Subject: RE: WG2XFQ on 486Khz....
> To: Brett Saylor <bds2@xxxxxxx>
> Cc: Charles Rippel <lantareamon@xxxxxxxxx>
>
>
> Please pass the word….****
>
> ** **
>
> WG2XFQ should be QRV (on the air) by late afternoon on Dec 31st.****
>
> I will let it run through at least New Year’s Day.****
>
> ** **
>
> Freq 486kHz.****
>
> ERP 20W into Marconi-T at 70ft.****
>
> Same audio loop as for the X-Mass event, with a comment that this
> transmission is a repeat of the original X-Mass 2012 transmisssion.****
>
> ** **
>
> 73,****
>
> -Brian, WA1ZMS/4 & WD2XSH/31 & WG2XFQ in Forest, VA.****
>
> ** **
>
> ** **
>
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx