Re: [IRCA] [Amdx] Would this pre-amp boost signals sufficiently for a Flag ora Loop?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] [Amdx] Would this pre-amp boost signals sufficiently for a Flag ora Loop?

Just a theoretical one at this point.  Mine would probably be a 10' X
25' or an 8' X 20.'

73,
Dave 

-----Original Message-----
From: Bill Nollman [mailto:billct97@xxxxxxxxxxx] 
Sent: Tuesday, December 29, 2009 1:57 PM
To: HASCALL, DAVID CIV DFAS; amdx@xxxxxxxxxxxxxxxx;
tvfmdx@xxxxxxxxxxxxxxxx
Subject: RE: [Amdx] Would this pre-amp boost signals sufficiently for a
Flag ora Loop?

Dave, how big of a flag/loop ? 
I have a 45'x75' loop that I have to attenuate it has so much gain !
I also have a 23'x30' loop that is just about right.

Bill

-----Original Message-----
From: HASCALL, DAVID CIV DFAS [mailto:DAVID.HASCALL@xxxxxxxx] 
Sent: Tuesday, December 29, 2009 1:28 PM
To: amdx@xxxxxxxxxxxxxxxx; irca@xxxxxxxxxxxxxxxx;
tvfmdx@xxxxxxxxxxxxxxxx
Subject: [Amdx] Would this pre-amp boost signals sufficiently for a Flag
ora
Loop?

I had a Sanserino loop that had a small pre-amp that used a single 9v
battery.  In checking out Ramsey Electronics' catalog, I see an RF
Preamp.  Would this model be sufficient to amplify signals from a Ewe or
Flag antenna or a loop as the small amp did on my Sanserino?

http://www.ramseyelectronics.com/cgi-bin/commerce.exe?preadd=action&key=
SA7  I see that its coverage is broadband - 100 KHz to 1000 MHz.
Thanks.

73,
Dave in Indy
_______________________________________________
This is Amdx - The WTFDA AM DX List.
Amdx mailing list
Post to: Amdx@xxxxxxxxxxxxxxxx
Your Info Page: http://lists.wtfda.info/listinfo.cgi/amdx-wtfda.info
Visit the WTFDA Forum at http://www.wtfda.info to view or upload your
audio
files! Register first.


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx