[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[IRCA] Fwd: Topband: Beacon at band edges
For those interested in such things, there is a propagation beacon presently running on two frequencies on 160 meters, run by N6TR, south of Portland, OR. He is looking for reports, so if you can read simple CW, and measure signal strength reasonably accurately, and are interested in assisting in a propagation experiment, please send him your observations. (a later update; he's running nearer 75 watts now). This was posted on the Topband mailing list.
best wishes,
Nick
>From: Tree <tree@xxxxxxx>
>
>
>
>
>I will be putting up a beacon that runs during the dark hours that alternates
>between 1800.5 and 1999.5 KHZ. It is running about 20 watts. The callsign
>is K7RAT.
>
>My match isn't the best at the higher frequency - so I would normally expect
>the signal at the high frequency to be weaker all things being equal.
>
>However, if you can hear the 1999.5 signal better - then for sure - it is
>due to improved propagation.
>
>Please send me signal observations.
>
>73 Tree N6TR
>tree@xxxxxxx
*****************************
Nick Hall-Patch
Victoria, BC
Canada
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx