Re: [IRCA] Semi OT: Cutting Ferrite Bars?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Semi OT: Cutting Ferrite Bars?



Thanks to everyone who supplied ideas/info on this subject. Since I have the tile saw readily available and a spare E100 Ferrite bar, I'll give that a try and let you know! Plenty of water.........

John B.







At 11:53 AM 7/24/2008 -0700, you wrote:
In the work that Gary DeBock, Guy Atkins and I are doing with mods to the E100, I've run up against the need to reduce the length of the stock ferrite bar by half.

Has anybody ever done this successfully??? Have you ever heard rumors of someone doing this successfully? HOW????

I seem to remember that Ferrite is actually a ceramic product. Is this true? If so, I just happen to have a professional tile cutters say, water-cooled, with a diamond blade. Ideas, comments? Prayers for the intrepid?

Thanks,

John B.
Orcas Island, WA, USA
Rcvrs: WiNRADiO 313e, Eton e1, Ultralights
Antennas: Two 70' x 100' Conti Super Loops, West and Northwest
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx