Re: [IRCA] [am] Remote SDR operation

["Craig Healy" <bubba@xxxxxxxxxxxxxxxxxxxx>]

> > Those of you who have experience with the DX Tuners software may
> > know if it can interface with the current crop of SDRs...
>
> I've had radios on both DX Tuners and it's successor, GlobalTuners.
> Most of the radios on the network right now are Icom PCR100/1000/1500
> models, although they've also supported other models like my Icom R-75
> and 718 ham transceiver. Don't know if the new person running the
> system would be interested in supporting the RFSpace models but you
> could send him an email: Ivo@xxxxxxxxxxxxxxxx

That would be interesting.  If Spectravue would take the bugs out of the
current program and allow remote operation, that would be good.  Ideally
RFSpace would add an ethernet port and the Spectravue would accomodate this,
it would be ideal.  I hope it's a matter of (short) time before this
appears.

In many ways this would be a significant step up.  Using ethernet would
eliminate the current USB port speed limitation and perhaps allow greater
recorded or viewed bandwidth concurrent with demodulation.

If I found an SDR that would be operable over the internet, I'd buy it
today.

Craig Healy
Providence, RI


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx