Re: [IRCA] Antenna question

["Bob Young" <youngbob53@xxxxxxx>]

This begs the question: Does it matter which end is grounded? As I have 
always grounded the end near the radio at the other end of the coax, I 
ground everything including the radios into a copper rod in the ground,

Bob young
Millbury, Ma


>From: kevin redding <big_h00pla@xxxxxxxxx>
>Reply-To: Mailing list for the International Radio Club of 
>America<irca@xxxxxxxxxxxxxxxx>
>To: Mailing list for the International Radio Club of 
>America<irca@xxxxxxxxxxxxxxxx>
>Subject: Re: [IRCA] Antenna question
>Date: Sun, 14 Jan 2007 13:43:31 -0700
>
> > The question: When I attach the feedline at the end of the long
> > wire, I will
> > solder the coax center wire to the antenna wire. But what does one
> > do with
> > the braid or shield at the same location adjacent to the antenna wire?
>
>Ground it.
>
>Kevin
>
>_______________________________________________
>IRCA mailing list
>IRCA@xxxxxxxxxxxxxxxx
>http://montreal.kotalampi.com/mailman/listinfo/irca
>
>Opinions expressed in messages on this mailing list are those of the 
>original contributors and do not necessarily reflect the opinion of the 
>IRCA, its editors, publishing staff, or officers
>
>For more information: http://www.ircaonline.org
>
>To Post a message: irca@xxxxxxxxxxxxxxxx
>


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx