[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[IRCA] Sept 2: Average but Asian for Me + Dial/Frequency Accuracy
- Subject: [IRCA] Sept 2: Average but Asian for Me + Dial/Frequency Accuracy
- From: "John H. Bryant" <bjohnorcas@xxxxxxxxxxxxxx>
- Date: Sat, 02 Sep 2006 16:36:05 -0700
Everyone else seemed to have quite a DU morning. I did not. Had
slightly below recent average number of hets and audio, but with the
early period (1220 to 1240) definitely favoring North China/Manchuria
and North Korea. No sign of ADK beacon on 530 in the Aleutians.
Later, at max dawn it was a pretty decent Japanese opening, including
a real boost right at dawn (for a change). At dawn, there was a
little DU activity, but not much.... low DU audio on 531, 558, 567,
1503 and 1512. If I didn't know better, I'd think that my Aussie
Super-size EWE was not working well.
I had off-channel signals on 702.03 (only signal there, thanks Guy)
747.056, 1016.95, 1025.955 and the usual 1205.95 CNR KK Service
There have been several discussions of frequency accuracy, drift,
etc, in the last 48 hours. I tend to agree with Chuck H. that most
methods have way too many oscillators involved as well as
temperature-sensitive components, to begin to talk very confidently
of readings to the single Hertz or finer. However, there are a few
techniques that seem to offer that level of accuracy.
The WinRadio 3xx Series can get within +or- a couple of Hertz or
maybe three, at least by methods that I understand.... The active
Spectrum Scope is rather a wonder and is essentially a virtual
oscilloscope looking closely at the RF Spectrum around where the
receiver is tuned. It has a zoom in and out capability, with the
widest view offering plus/minus 10 kHz and the closest look (where I
generally keep it) shows plus/minus 2 kHz. The carrier of each
received signal stands out as a spike... a steady spike that only
undulates with propagation. THe modulation of each signal, if it is
getting through, appears as rapidly changing spikes and ripples. Most
of the time, the only thing worth watching is the carrier, of course.
The resolution of the scope is such that I think it would be very
obvious if the tuned frequency were "off" from reality more than a
couple of Hertz.... The spikes would not be symmetrical about the
centerline of the scope, when tuned to the assigned frequency. I have
yet to notice a NAm station that did not appear perfectly on freq....
meaning within 3 or 4 Hertz..... so thermal drift and oscillator
inaccuracy of the 3xx series appear to be within those limits. Its
easiest to tell when I'm seeing an off channel signal when there is
also an on-channel carrier on that frequency.... There are two
distinct spikes and they undulate at differing rhythms since they are
coming through different paths in the ionosphere. Then, there is no
question that there is at least one signal off frequency and its
relatively easy to measure the aprox. difference between the two.
Its more difficult to notice an off channel signal when it is the
only signal on that frequency and the difference is rather
small. Guy mentioned to me an off-channel that he as hearing on 702
high and I paid attention for the first time, this morning. Sure
enough. My excuse for missing this one is that it was all alone and
recently has only been in briefly right at dawn. In fact, its acting
like the 2BL signal from a propagational point of view.... surely it
wouldn't be one of the flagship ABC stations off by 30 Hertz?????
Anyway, as Chuck also pointed out, there are likely only a handful
(literally) of people on the planet that are interested in this subject...
So, I'll close!
John Bryant
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://arizona.hard-core-dx.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx