[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IRCA] Supercharging the XHDATA D-808-- Full Construction Article



     The new XHDATA D-808 AM-LW-FM-SW-AIR portable has been a very pleasant surprise among radios introduced this year. With good stock sensitivity on the both the AM and FM bands, multiple DSP filtering choices and SSB capability, the radio is a tremendous value for those living outside of North America (at around $70).

     Because the Chinese-made model has obviously been "inspired" (to use a generous term) by the C.Crane Skywave SSB model (which was manufactured at the nearby Redsun factories in China), direct shipments of the D-808 from China to North American purchasers seem to have been forbidden by XHDAT.A, though. This is apparently to avoid a copyright lawsuit from C.Crane, whose Skywave SSB circuitry is quite closely duplicated in the D-808. A single eBay seller has devised a way to skirt around this restriction by shipping to North America through Israel, though-- ending up with a booming business by selling 62 models to the USA and Canada at the marked up price of $112.87 + $10 shipping.

     Despite its murky design pedigree, though, there is no doubt about the radio's excellent potential. It is controlled by the SiLabs Si4735 DSP chip, offering multiple DSP selectivity choices along with the SSB capability. If you have purchased the D-808 and are satisfied with its stock performance, that's wonderful. But if you would like to transform it into something like a dream travel portable, why not consider installation of a 7.5 inch Medium Wave or Longwave loopstick? Both of those models have been built here, and they are real thrillers. The 7.5" Medium Wave loopstick D-808 model was taken to the Rockwork ocean cliff in Oregon state recently, where it received the following signal from 1017-A3Z in Tonga (10 kW at 5,632 miles/ 9,064 km) all by itself at 1301 UTC on August 8th. It is even picks up the 5 kW Australian horse racing station 2KY (in Sydney) as a weak co-channel in the middle of the recording  https://dreamcrafts.box.com/s/tp3i89vky6p7hbylgkk1bp4pa5nvnuku

     For those who would like to construct one of these 7.5" loopstick D-808 models, a full construction article is being prepared. The article is complete through the introduction, background information on the model and the construction parts list, and the partial article up to that point is posted at http://www.mediafire.com/file/yc29lowg0do41d1/Supercharging_the_XHDATA_D_-_Copy.doc/file

The link is provided for those who wish to order the construction parts while the rest of the article is being wrapped up, which should be completed in about a week. Good luck to all who take the plunge!


73 and Good DX,

Gary DeBock (in Puyallup, WA, USA)

 

     
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx