[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] phasing units, then and now

Guy:


I've ben told the AFEDRI native software and HDSDR both support phasing. I have two problems with the AFEDRI: (1) it only records 600 kHz spans, and (2) phasing can only be done live. There's no way I know of to do phasing on recorded files.  This is a shortcomimng that no one has solved for any SDR, as best I know.



Chuck

________________________________
From: IRCA <irca-bounces@xxxxxxxxxxxxxxxx> on behalf of Guy Atkins <dx@xxxxxxxxxxxxx>
Sent: Monday, July 9, 2018 11:59 AM
To: Mailing list for the International Radio Club of America
Subject: Re: [IRCA] phasing units, then and now

Hi Mark,

That was an excellent overview of DX hobbyist use of phasers! You covered
the early history which I wasn't aware of, as I was mostly DXing on the
tropical bands when Gordon Nelson and others did their pioneering work.

There is one more phase (LoL) developing now--software based methods using
coherent dual tuners (or channels). I'm sure you're aware of Afedri's AFE822x
SDR-Net device
<http://www.afedri-sdr.com/index.php/new-afe822x-sdr-net-dual-channel>. It
AFE822x SDR-Net (Dual Channel)<http://www.afedri-sdr.com/index.php/new-afe822x-sdr-net-dual-channel>
www.afedri-sdr.com
AFE822x SDR-Net ( Dual Channel ) Features Synchronized (diversity) or separated (independent) Dual Channel reception mode 100 kHz to 30.00MHz continuous frequency range



was introduced a couple of years ago, but unfortunately software has not
appeared to easily take advantage of phasing. If you jump through a lot of
hoops and complexities with LINRAD, you can catch a glimpse of the future
of software phasing, but it's nothing practical for a DXer's use in my
opinion.

Much more recently, SDRplay's RSPduo <https://www.sdrplay.com/rspduo/> was
introduced with its dual tuners. I have one myself, mainly for its future
possibilities. I'm hoping that the 14-bit structure and additional front
end filters will provide better basic performance than earlier RSP models
I've owned.I expect it to be neck-and-neck with the AirSpy HF+ SDRs in a
quiet DXpedition setting...maybe not so much in my suburban RF jungle.

SDRplay looks to be the most active of all the SDR software developers, and
they say they fully intend to offer phasing features in a future release of
SDRuno software. Their activity, enthusiasm, and customer support make me
think they are the group most likely to take software phasing out of the
laboratory and into the DXer's shack. If he has the time and inclination,
Simon Brown of SDR-Console software could implement RSPduo phasing too, but
he's *not* dropped any hints about this.

73,

Guy Atkins
Puyallup, WA
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx