[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] Super KAZ question



The single loops are rather forgiving. But please give me the best estimate
of the dimensions so I can model it in EZNEC to make sure. I have modeled a
couple of offset KAZ's for DXers previously and they seemed OK.

Or if you want it symmetric, just go 54 x 2=108 ft.  73 KAZ

On Mon, Mar 21, 2016 at 7:59 PM, Patrick Martin <mwdxer@xxxxxxxxx> wrote:

> I went out and measured the distance across the yard and I have over 112
> feet and the tree in the middle is about 54 feet, so the Super KAZ should
> work, but may be a bit lopsided. But at 112 feet if I used 1:4 I would have
> to go up 25-30 feet. I think the tree branched behind the house, I should
> get close. So it looks like I am still in the ballpark, that is if I do not
> lose anymore trees. Does the KAZ have to be centered perfectly? The apex
> will not be exactly centered. The K9AY and EWE's I have built have always
> been forgiving. The old coax is still out there. I may have to connect an
> extension, but that is easy. So I may get something up sooner than I
> thought. I just need some good weather.
>
> Patrick Martin
> Seaside OR
> KGED QSL Manager
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
>
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx