Re: [IRCA] Palstar MW550P Comments/Evaluations

[Patrick Martin <mwdxer@xxxxxxxxx>]

The MW550P does very well with the SPR4. I can use the stock bandwidth (4KHZ) and with the 550P, it narrows it, so the audio is better and I still get better bandwidth. I have the SPR4 modified so the crystal filter works on AM, but often it is a bit too narrow. On TA openings the SPR4 does better than the R8, so the 550P is a real asset.

Patrick Martin
Seaside OR
KGED QSL Manager

> From: endeavor29@xxxxxxxxxxx
> To: irca@xxxxxxxxxxxxxxxx
> Date: Sat, 31 Oct 2015 00:38:55 +0000
> Subject: [IRCA] Palstar MW550P Comments/Evaluations
> 
> I would like to thank all of you who took the time and effort to respond to my request for information about the Palstar MW550P MW preselector. Based on your comments, since I will be using vintage receivers (HQ-140X, NRD-515, and Drake R-7) for AM-BCB DXing, this unit should be a good fit..
> 
> 
> 
> 
> BTW, I should also mention that posts from this group have me looking at the Wellbrook small magnetic loops rather than the better known Inlogis (Pixel) units. Thanks also for that.
> 
> 
> 
> 
> 73,
> 
> Steve Hanes (K4VWS) TN
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Sent from Windows Mail
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
> 
> Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
> 
> For more information: http://www.ircaonline.org
> 
> To Post a message: irca@xxxxxxxxxxxxxxxx
> 
 		 	   		  
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx