Re: [IRCA] Recorded AM BCB Logs made with ELAD FDM-S2 Receiverâââ.

[Russ Edmunds <wb2bjh@xxxxxxxxx>]

I usually run longer - :58 - :07, although I usually skip the portion
:02-:04.30 when reviewing. Many ID's can be had coming out of the local TOH
newscast. Also, ESPN for one doesn't have their ID break at TOH - it's
often closer to :05.

Russ Edmunds
15 mi NW Phila
Grid FN20id
<wb2bjh@xxxxxxxxx>

AM: Modified Sony ICF2010's (2) barefoot w/whip
FM: Yamaha T-80 & T-85, each w/ Conrad RDS Decoder;
Onkyo T-450RDS; Tecsun PL-310 ( 2);
modified Sony ICF2010 w/APS9B @ 15';
Grundig G8 w/whip; modified Sony ICF2010 w/whip


On Wed, Apr 8, 2015 at 1:01 PM, Paul B. Walker, Jr. <
walkerbroadcasting@xxxxxxxxx> wrote:

> If I were to remote record things overnight, I would probably set my
> recordings to go from 59:00 to 01:30
>
> if the station is running a talk or music format by satelitte, it should ID
> straight up at 00:00. If theyre running locally automated music, alot of
> stations have an update set at 59:00 to push out anything left but let
> whats playing.. so if a song started playing at 57:00 or 57:30 and is 2 1/2
> minutes long.. it'd hit somewhere between 59:30 and 00:00.
>
> Some stations run late, 00:30.. 01:00.. 01:30.. some could run even later
> and it happens, but not many.. and in the interest if keeping your file
> small, i would start wit this.
>
> Paul
>
> On Tue, Apr 7, 2015 at 9:48 PM, Les Rayburn <les@xxxxxxxxxxxxxxxx> wrote:
>
> > Welcome to the world of SDR DXing. Quite agree that the manuals (of all
> > the SDR receivers) leave a lot to be desired. The rapid pace of
> development
> > and software enhancements leaves little time to write detailed manuals,
> I'm
> > afraid. Developers now seem to rely more on User Groups, forums, etc. to
> > allow users to help each other. That system works well, but it takes some
> > getting used to.
> >
> > Allow me to share some tips given to me by AM DX'er James Niven when I
> > started with my Elad SDR. They've proven to be very helpful. First of
> all,
> > make sure that you subscribe to the Elad Yahoo Group, and update your
> > software frequently. Enhancements and improvements appear quite rapidly..
> > Sometimes within hours of a feature being requested by a user on the
> Yahoo
> > Group! The latest software can be downloaded at:
> >
> > http://sdr.eladit.com/FDM-sw2%20Software/
> >
> >
> >
> > I successfully have mine setup for TOH recordings across the whole
> > broadcast band.
> >
> > I am still experimenting with different settings, but I seem to be happy
> > with the file size set at 2048mb and set to 1 file.
> >
> > For the recording schedule, I started with this recording configuration:
> >
> >
> > I start recording 2 minutes before the TOH 00:58, then finishing at 5
> > minutes past the hour, I found the file size very large.
> >
> > I then tried recording from 00:58 to 00:03, so 5 minutes, still a large
> > file but enough to look at every frequency in the AM band for TOH.
> >
> > Also, how I set mine up is change the CW to AM, then the LO frequency, I
> > set to 1120.000 kHz and the tuned frequency to 540.000 kHz. This will
> give
> > you the whole AM band
> > and when you begin reviewing your files, it will start at 540khz, this is
> > my method and approach.
> >
> > James Niven
> >
> > Austin, Texas
> >
> > Also keep in mind that the Elad FDM-S2 will work with more than one piece
> > of software. This is the beauty of an SDR, you're not limited to using
> the
> > manufactures software exclusively. One of the easiest to use and master
> > software packages for SDR is Simon Brownâs SDR-Console V2 software (
> > www.sdr-radio.com) It's free, and easier to use than most. HDSDR is
> > another software application that works well with the Elad. You may want
> to
> > experiment with them to see if you enjoy them more.
> >
> > Recommend this detailed review of the Elad as well. It's full of
> > suggestions on how to use the software, and do some great things with the
> > receiver. Hope you enjoy the ride, it's changed my DX life forever.
> >
> > http://swling.com/blog/2014/12/a-review-of-the-elad-fdm-
> > s2-software-defined-receiver/
> >
> >
> > --
> > 73,
> >
> >
> > Les Rayburn, N1LF
> > Maylene, AL
> > EM63
> >
> > Member NRC, IRCA, & Medium Wave DX Circle
> > Former CPC Chairman for NRC/IRCA
> >
> > Elad FDM-S2 SDR, SDR-IQ,Funcube Pro, Wellbrooke ALA-1530+ loop, LF
> > Engineering Active Whips,
> > Quantum Phaser, Kiwa Loop, Palstar MW Pre-Selector
> >
> >
> > _______________________________________________
> > IRCA mailing list
> > IRCA@xxxxxxxxxxxxxxxx
> > http://montreal.kotalampi.com/mailman/listinfo/irca
> >
> > Opinions expressed in messages on this mailing list are those of the
> > original contributors and do not necessarily reflect the opinion of the
> > IRCA, its editors, publishing staff, or officers
> >
> > For more information: http://www.ircaonline.org
> >
> > To Post a message: irca@xxxxxxxxxxxxxxxx
> >
> >
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
>
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx