[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[IRCA] FS DX-302
- Subject: [IRCA] FS DX-302
- From: "T. Hills" <"thills"@sio.midco.net>
- Date: Wed, 12 Mar 2014 10:43:23 -0500
I have a DX-302 on the bench in the process of being refurbished and
thought I'd offer it to interested groups before putting it on Ebay. The
case is in very good condition with some silver paint rubbed off on the
bottom of the front panel.
I'm waiting on a couple electrolytics to finish recaping it and right
now it's "factory" other than stiffening the power supply. Without mods
and after alignment it's more sensitive than my factory R-71A on the
lower bands and less so above 15MHz which is typical for a 302. I've
rewound T206 on my 302 and it perked up the upper frequencies quite a bit.
There are a number of mods that could be done easily since it's already
opened up and I would do them for a buyer at little or no cost.
If you plan on using it mostly for MW/LW there are front end, audio and
AGC mods that I've found work very well on my personal 302 and would do
at no cost, some others are a real PITA and I'd have to charge a bit for
them.
I anyone is interested email me off list.
Tim Hills
Sioux Falls, SD
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx