Re: [IRCA] [NRC-AM] 16:1 Matching Transformer for "Superloop"
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] [NRC-AM] 16:1 Matching Transformer for "Superloop"



The MiniCircuits transformers have a reputation of burning up their almost-microscopic wire when lightning hits nearby. I wouldn't consider using them on antennas unless I needed an expensive fuse.

I don't know what the Superloop article recommended for a transformer but I'd use a 73 material in binocular form as shown at http://www.w8ji.com/core_selection.htm .


Chuck




On 1/16/2012 3:13 PM, Russ Edmunds wrote:
If your lighning problem results in burning up the transformers, then it may not be simply that the ones you tried have issues. You may have to disconnect and/or short to ground the antenna whenever storms are forecast. I realize that's a response you'll necessarily like, but an antenna grabs signals and noise and directs them toward the other end, and if that's where the transformer is, then it's in the line of fire.

Russ Edmunds
15 mi NNW of Philadelphia
Grid FN20id
<wb2bjh@xxxxxxxxx>
FM: Yamaha T-80&  Onkyo T-450RDS w/ APS9B @15'; Grundig G8
AM:  Modified Sony ICF 2010's barefoot

--- On Mon, 1/16/12, Mark Durenberger<Mark4@xxxxxxxxxxxxxxx>  wrote:

From: Mark Durenberger<Mark4@xxxxxxxxxxxxxxx>
Subject: Re: [NRC-AM] [IRCA] 16:1 Matching Transformer for "Superloop"
To: les@xxxxxxxxxxxxxxxx
Cc: "DX @NRC"<am@xxxxxxxxxxx>, "Mailing list for the International Radio Club of America"<irca@xxxxxxxxxxxxxxxx>
Date: Monday, January 16, 2012, 6:02 PM





Naw they're pretty tiny.

Regards,
Mark Durenberger




From: Les Rayburn
Sent: Monday, January 16, 2012 4:20 PM
To: Mark Durenberger
Cc: Mailing list for the International Radio
Club of America ; DX
@NRC
Subject: Re: [IRCA] 16:1 Matching Transformer for
"Superloop"

Mark,

I used the Mini-Circuit RF Transformers in the past
on a Flag antenna. Good performance, but I suffered several failures due to
nearby lightning strikes.
Anything I can do to "beef them up"?


73,



In a Foreign Lottery,
You Always Lose.
deliveringtrust.com
Les Rayburn, Director
High Noon Film
130 1st Avenue West
Alabaster,
AL 35007-8536
(205) 621-7500
(205) 621-7505 FAX
(205) 253-4867
CELL
http://www.highnoonfilm.com
On
1/16/2012 4:01 PM, Mark Durenberger wrote:
Yeah...I see the system burped because it couldn't swallow that
   whole URL.

So go to Minicircuits.com and ask 'Model Search" to show
   you T16-6.

Regards,

Mark Durenberger


--------------------------------------------------
From: "Mark
   Durenberger"<Mark4@xxxxxxxxxxxxxxx>

Sent: Monday, January 16, 2012 3:55 PM
To:<les@xxxxxxxxxxxxxxxx>; "Mailing
   list for the International Radio Club of America"<irca@xxxxxxxxxxxxxxxx>; "DX
   @NRC"<am@xxxxxxxxxxx>
Subject: Re:
   [IRCA] 16:1 Matching Transformer for "Superloop"


   Les: Try  www.Minicircuits.com

http://www.minicircuits.com/MCLStore/ModelInfoDisplay?13267504978520.5445037711796857


This puts you right on the page for a 16:1 transformer. They're pretty inexpensive.

Regards,

Mark Durenberger


--------------------------------------------------
From: "Les
     Rayburn"<les@xxxxxxxxxxxxxxxx>

Sent: Monday, January 16, 2012 3:48 PM
To:<am@xxxxxxxxxxx>;<irca@xxxxxxxxxxxxxxxx>;<amfmtvdx@xxxxxxxxxxxxxxx>;
     <abdx@xxxxxxxxxxxxxxx>

Subject: [IRCA] 16:1 Matching Transformer for "Superloop"


     I've finally decided to try my hand at building
       a  "Superloop" antenna as described in the October 2009 issue of
       "Popular Communications" in an article by Bruce Conti.

In that
       article he mentions a 16:1 matching transformer made from a binocular
       ferrite core and 30 AWG wire. I've never had much luck at winding my own
       coils. For my previous "Flag" antenna, I used 16:1 transformers from
       Mini-Circuits which performed well, but suffered many failures due our
       frequent and intense lightning storms here.

Bruce's article
       mentions that many amateurs are available to make these coils and easily
       found on the Internet--but I'm having no luck.

Does anyone out
       there know someone who makes great 16:1 transformers for Superloops and
       would be willing to wind two of them for me? Happy to pay for the service,
       and can send funds via PayPal or USPS money order.
Thanks!

73,


Les Rayburn, N1LF
121 Mayfair Park
Maylene, AL 35114






c--
*In a Foreign Lottery,
You Always
       Lose.*
deliveringtrust.com<http://www.deliveringtrust.com>


Les Rayburn, Director
High Noon Film
130 1st Avenue West

Alabaster, AL 35007-8536
(205) 621-7500
(205) 621-7505 FAX

(205) 253-4867 CELL
http://www.highnoonfilm.com


_______________________________________________
IRCA mailing
       list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca


Opinions expressed in messages on this mailing list are those of
       the original contributors and do not necessarily reflect the opinion of
       the IRCA, its editors, publishing staff, or officers

For more
       information: http://www.ircaonline.org

To
       Post a message: irca@xxxxxxxxxxxxxxxx





-----Inline Attachment Follows-----

_______________________________________________
The NRC AM mailing list
Now accepting pre-orders for the 32nd AM Radio Log
Questions? owner@xxxxxxxxxxx
Latest DX Tests are found at
http://www.nrcdxas.org
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx




_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx