[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] Technical Review: CCrane CCRadio-EP AM/FM AnalogPortable Radio (loopstick Litz)
- Subject: Re: [IRCA] Technical Review: CCrane CCRadio-EP AM/FM AnalogPortable Radio (loopstick Litz)
- From: "Steve Ratzlaff" <steveratz@xxxxxxxxxxxx>
- Date: Mon, 23 May 2011 16:58:32 -0700
Hi Gary,
Thanks for reminding me.
I didn't mention it in my review, but the Litz used on the EP radio's
loopstick appears to be decent. It's quite fat in diameter compared to the
usual tiny Litz found on the usual portable radio loopsticks. Purely
guessing, but I'd guess the EP loopstick Litz is something like 100/46,
perhaps larger. (100 insulated strands of #46 gauge.)
Steve
----- Original Message -----
From: <d1028gary@xxxxxxx>
To: <irca@xxxxxxxxxxxxxxxx>
Sent: Monday, May 23, 2011 4:07 PM
Subject: Re: [IRCA] Technical Review: CCrane CCRadio-EP AM/FM AnalogPortable
Radio
Hello Steve (and all),
Thanks for the excellent CCRadio-EP technical review, Steve.
Tecsun apparently first introduced this two Litz-wire lead, multi-section
loopstick coil system in the PL-310 Ultralight model, and has continued it
in the PL-380 and PL-606 models. Why the Chinese factories have come up
with this loopstick coil arrangement is a mystery, since simple
replacement of the Chinese Litz wire (on the same ferrite bar) with
higher-quality 40/44 Litz wire in a single coil (of the same inductance)
willl always result in a dramatic signal improvement on both the MW and LW
bands in all these radios. I don't know if the same would hold true in the
CCRadio-EP, but if the Litz wire is like that in the Tecsun ULR models,
this simple $5 modification would be worth a try.
73, Gary
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx