Re: [IRCA] SoftRock RX Ensemble kit for AMBC usage
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] SoftRock RX Ensemble kit for AMBC usage



Nick is correct in that the SoftRock RX Ensemble II kit when built for the LF-MW option will cover the AMBC band. I have one of those kits, still unassembled, with the intention to someday try it on LF. Since it's a kit it has to be assembled, and it is all small surface mounts parts, and one needs to be comfortable working with SMT components to build the kit. I have no problem with that. My problem is many folks have trouble getting the software working. I am not good with software unless I have step by step procedures to follow. The SoftRock kits are primarily for folks comfortable with doing SMT construction plus comfortable with working with software to get it running with your particular computer. One list I'm on, it took literally several months for some folks to figure out how to get the software to work on their computers to run the Ensemble RX II kit. After seeing their problems I was much less interested in getting my kit built just to see if I could get the software to run. The other problem one person does all the kitting and distributing of the SoftRock kits; it's a part time hobby endeavor for him. He periodically makes limited runs of various SoftRock versions, then posts the availability on his webpage and on the yahoo SoftRock list. Since there is a continual high demand for all versions of SoftRocks, one has to almost order the desired kit within minutes of when the message about availability is posted to get a chance of getting a kit. That means you have to be subscribed to the yahoo list and be able to check email multiple times during the day. I was fortunate to get an Ensemble II kit the very first time that I tried. Many folks are not so fortunate; some have been waiting for a year or more for the chance to obtain one! But the receiver kits aren't as heavily in demand as the transceiver kits; that's probably why I was able to get one the first time I tried. But if you have experience working with SMT parts and are highly motivated to work with the software to get it going with your computer, then the SoftRock kits are definitely the least expensive way to experience a "Software Defined Radio". I have to admit I'm not very motivated any longer even though I could assemble the kit.
73,
Steve

----- Original Message ----- From: "Nick Hall-Patch" <nhp@xxxxxxxx> To: "Mailing list for the International Radio Club of America" <irca@xxxxxxxxxxxxxxxx>
Sent: Monday, January 10, 2011 3:43 PM
Subject: Re: [IRCA] Testing New SDR software


--
Nick Hall-Patch
Victoria, BC


from http://www.wb5rvz.com/sdr/:

Ensemble All-Band RX II

In the second option, the Ensemble RX II provides coverage of LF frequencies
from approximately 160-10m, in four different optional "super bands" (each with underlap and overlap within the parameters of the associated bandpass filter):

  1. Band 0: 1000m - Continuous coverage from 180 kHz to 480 kHz
  2. Band 1: 500m - Continuous coverage from 400 kHz to 800 kHz
  3. Band 2: 250m - Continuous coverage from 800 kHz to 1.6 MHz
  4. Band 3: 160m - Continuous coverage from 1.6 MHz to 3.0 MHz

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx