Re: [IRCA] Home Display of QSL Letters & Cards

[Pete Taylor <ptdx@xxxxxxxxxxx>]

I would be wary of putting any QSLs which were totally or partially printed using toner in a plastic sheet protector. This includes letters. If you leave them inserted forever, OK, but after a few years, the toner substance bonds with the plastic, and when you remove them, much of it is absorbed into the plastic - and it is impossible to get it off.

Another preservation method would be to scan them. Not sure I will ever get around to that...

Pete Taylor
Tacoma, WA
12225w 4719n
HQ180 & ICF2010
Kiwa aircore & Palomar loops
DX398, SRF-59 & M37V
Eton E100 + Tecsun PL-300/380
==========================
Patrick Martin wrote:

> You can always use the 3-ring binder and use plastic sheet protectors.
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx