[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] DRM software for Perseus (Off Topic)
Hi Andy,
you can find a lot in the perseus_SDR Yahoo group archive.
http://groups.yahoo.com/group/perseus_SDR/
You need to install Dream and Virtual Audio Cable. Here are quick
instructions:
-Follow instructions for VAC settings
(http://f1.grp.yahoofs.com/v1/MPFmSoNU-UPgxglOT6ADD5c7XyubDmLMYBWKDDanVa14y93VUcEAe4lFFzqcIW1loJ-ug1wigpNhkziMbOmVcAfMEMGV/VAC_only_settings.PNG
<http://f1.grp.yahoofs.com/v1/MPFmSoNU-UPgxglOT6ADD5c7XyubDmLMYBWKDDanVa14y93VUcEAe4lFFzqcIW1loJ-ug1wigpNhkziMbOmVcAfMEMGV/VAC_only_settings.PNG>)
but you can try and other combinations.
First of all you must setup Dream.
-Go to Settings -> Sound Card Selection -> Sound In -> Line 1 (from VAC)
-Then go Settings -> Sound Card Selection -> Sound Out -> Speakers
Open Perseus
-Pick up the desired freq. e.g. 5790 KHz for BBC & DW
-Select DRM mode
-Decoding is started. After few seconds you will hear the sound from
speakers."
73, Mauno
Andy Ikin kirjoitti:
Hello Guys,
Can anyone point me in the right direction for free DRM software (if poss.) for the Perseus SDR.
73
Andrew Ikin
Brecknockshire Wales
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx