[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] How much ground for a EWE?
At 22:16 3/10/2009, you wrote:
>Yes it is adjusted in exactly the same way as the ewe - if anything I find the null more consistent than when using earth rods and consequently there is less need to adjust it.
>
>One my set up the resistor goes between the the bottom of the down leg and the start of the bottom wire - ideally it should be inserted midway down the downleg and so should be the balun on the other downleg.
>
Sounds like you have a terminated corner-fed loop, Paul.
I believe Bruce Conti first described it, see http://www.bamlog.com/superloop.htm
What dimensions do you use?
best wishes,
Nick
*****************************
Nick Hall-Patch
Victoria, BC
Canada
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx