Re: [IRCA] KRKO and KONP-540?

[satya@xxxxxxxxxxxx]

Hey Pete:

It was probably a 910 khz IF image (twice 455 khz = 910 khz, and 1450-910
= 540).  My e100 has the same problem with the 455 khz IF.  Since KONP is
only supposed to be 1000 watts, they were getting some pretty good
over-the-water coverage that day!

I know that Gary DeBock gets a hefty image on 540 from his local KUSH as
well.

73 - Kevin S
Bainbridge Island, WA


> Victoria has two locals on 900 and 1070. I could not figure out any
> combination of frequencies which would create a mixing product
> resulting in KONP-1450's appearance on 540 on the E100. I listened
> for it on the car radio in Port Angeles but it was dark by then and
> CBK ruled. Does anyone have any thoughts on this?
>
> Pete Taylor
> Tacoma, WA
> 12225w 4719n
> HQ180 + Kiwa air core loop
> ICF2010 + "     "    "      "
> DX398; Palomar loop
> SRF-59 & -M37V
> Eton E100
>
>
>
>
>
>
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
>
>

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx