Re: [IRCA] DXing with a One Tube Radio
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] DXing with a One Tube Radio



Now, this is the kind of thing I would love to try, and have contests with.


On Mon, Dec 29, 2008 at 8:39 PM, Deane McIntyre <dmcintyr@xxxxxxxxxxx> wrote:
> Some of you may recall the books by Alfred Morgan such as The Boy
> Electrician and The Boys First Book of Radio and Electronics that
> had instructions on how to build, among other things, crystal radios
> and a one tube regenerative radio. In the case of the regenerative radio,
> a 1H4H triode tube was used with the filament operated off a 1.5 volt D cell
> and a 45 volt battery for the plate voltage. Later editions used a 6BF6 tube
> instead as the 1936 vintage 1H4G tube became difficult to find. The circuit
> was close  to that used in the early radios of the 1921 - 1925 time period,
> when AM broadcasting was getting started.
>
> Having read that in those days of few stations these one tube regen radios
> were capable of DX, I built one, using a 1H4G tube, and am having fun
> DXing with it. I finished it last night and soon had logged CKRM-620 Regina,
> KIRO-710 Seattle among many other stations. Best DX tonight so far was
> WGN-720
> Chicago, also had KNRS-570 Salt Lake City, KNBC-680 San Francisco among
> many other stations. Best daytime DX was CBK-540. Am having a lot of
> fun with this - with seven local 50 kW stations here in Calgary, was
> wondering if I would get
> much DX at all but with careful adjustment of the regeneration the
> selectvity
> is not too bad - was even able to log with good signals KBOI-670 next to
> local 50 kW CFFR-660.
>
> As 45 volt B batteries are just about a thing of the past, I am using four
> somewhat elderly 9 volt batteries in series that gives 32 volts. Total
> cuurent draw is only 0.9 mA (and 50 mA from the D cell for the filament)
> so the batteries should last a long time. Antenna is a 50 foot wire outside
> run from the house to the garage.
>
> 73,
>
> Deane McIntyre VE6BPO
> Calgary AB
> _______________________________________________
> IRCA mailing list
> IRCA@xxxxxxxxxxxxxxxx
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@xxxxxxxxxxxxxxxx
>
>



-- 
Leonard Hyde
Weed, CA
Realistic DX-440
6 foot shielded loop
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx