[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] SRF-59 Alignment Procedure... Proceed At Your Own Risk!
- Subject: Re: [IRCA] SRF-59 Alignment Procedure... Proceed At Your Own Risk!
- From: "Paul B. Walker, Jr." <walkerbroadcasting@xxxxxxxxx>
- Date: Tue, 25 Dec 2007 15:01:08 -0500
Yeah, Bert, my thoughts exactly!
Paul
On Dec 25, 2007 2:49 PM, Ira Elbert New, III <ien3@xxxxxxxxxxx> wrote:
>
> For those of us with two left thumbs, you charge how much for this
> procedure...?
>
>
> Bert New
> Watkinsville, Georgia
> Proudly Serving You Since 1964!
>
> ----------------------------------------
> > From: D1028Gary@xxxxxxx
> > Date: Tue, 25 Dec 2007 01:38:27 -0500
> > To: irca@xxxxxxxxxxxxxxxx
> > Subject: [IRCA] SRF-59 Alignment Procedure... Proceed At Your Own Risk!
> >
> > Hello All,
> >
> > Recently I have had several requests for a detailed SRF-59
> alignment
> > procedure, preferably one that will not send the hobbyist straight into
> the
> > psychiatric ward.
> >
> > The procedure below has been simplified as much as possible, but
> it is
> > still fully capable of putting your nerves through the wringer. It
> should
> > only be attempted if you have certain proof that your SRF-59 has a
> sensitivity
> > problem (relative to another SRF-59), and then only if you have
> experience in
> > miniature electronic disassembly/reassembly, patience, good eyesight,
> steady
> > nerves, and confidence. The SRF-59 is not a Heathkit, and was not
> > engineered for user-friendly assembly. Having accepted all the above
> warnings, feel
> > free to proceed at your own risk:
> >
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx