[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] AC twin lead or speaker wire for lead in.
- Subject: Re: [IRCA] AC twin lead or speaker wire for lead in.
- From: mwdxer@xxxxxxxxx (Patrick Martin)
- Date: Fri, 17 Aug 2007 20:45:28 -0700
Craig,
There was an article foating around called something like, Is Your lead
in a snake? There were experiments about grounding the coax. By your
experiments Craig, it sounds like the coax is an issue. Now, why doesn't
coax going to an FM or TV antenna affect the directivity? Or does it?
We all know that coax is good for shelding against noise, but the
thought of the coax even with matching transformers affecting the
pattern is for concern. I wonder if there is any coax out there that
would work. It sounds like the general run of the mill coax is suspect.
I still like using coax as it is good against water and noise. Hardline?
I wonder what would be the best.
In my daytime tests of checking the R8 with coax from in the house
and out in the back running the antennas directly into the receiver, I
did not find any difference as far as I could tell. Nothing "jumped" out
at me. So I wonder in reality, if the difference is in what type of an
antenna is used, loop vs beverager vs EWE.? The load might make a
difference too. Any thoughts?
73,
Patrick
Patrick Martin
KAVT Reception Manager
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx