[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] New receiver ground
- Subject: Re: [IRCA] New receiver ground
- From: Nick Hall-Patch <nhp@xxxxxxxx>
- Date: Sat, 11 Aug 2007 17:30:08 +0000
At 16:10 11/08/2007, you wrote:
>On my ground rod I dug a hole 5 feet deep with a shovel and a 5 foot
>steel bar and used a shop-vac to get the dirt out of the hole when
>the shovel would not work any more. I than used a large hammer to
>pound the copper pipe in the last 5 feet but had to stop at 4 feet
>as I hit a rock. I than put in 30 lbs of salt with lots of water
>over the next 2 days. Than I used 30 lbs of Bentonite to fill the hole.
>
With those skills and dedication, Bill, we'll have to get you out to
Grayland someday.....only problem is even when we put a good ground
rod in, nature builds a dune on top of it before the next expedition.
best wishes,
Nick
****************************************************************************
Nick Hall-Patch
Victoria, B.C.
Canada
****************************************************************************
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx