[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [IRCA] SP 600 /R390
- Subject: Re: [IRCA] SP 600 /R390
- From: "Bob Young" <youngbob53@xxxxxxx>
- Date: Sun, 06 May 2007 13:18:19 -0400
Yes I love crystal filters, 388's have them but the noise limiter is not as
good as on a 390 or 390A, the best of both worlds would be a phasing control
on a 390A as the narrow positions are crystals (I think), the mechanical
filter's narrowest postion is 2KHz, the 1 and 0.1 are crystals. It does very
well with hets though except when the stations are 1 KHz apart like when
WWKB 1520 (which booms in around here) and 1521 Saudi Arabia (which also
booms in around here) are both in. I really miss phasing in that situation,
and love the 600 and the 388. Actually the HRO's are pretty good with splits
also and have great crystal filters,
Bob Young
Millbury, MA
>From: mwdxer@xxxxxxxxx (Patrick Martin)
>Reply-To: Mailing list for the International Radio Club of
>America<irca@xxxxxxxxxxxxxxxx>
>To: irca@xxxxxxxxxxxxxxxx (Mailing list for the International Radio Club
>ofAmerica)
>Subject: Re: [IRCA] SP 600 /R390
>Date: Sun, 6 May 2007 10:02:37 -0700
>
>Bob,
>
>I never knew that. Then the R-390 does have an honest Noise Blanker and
>not a Noise Limiter as the SP 600 had. Now that is interesting. I wonder
>what kind of circuit the R 390 uses? Anyone know? That diode set up in
>the SP-600 never did anything much except distort the audio as you
>mentioned. That was the only reason I sold the SP 600. It was one great
>receiver and netted me a lot of great DX through the years. One thing I
>really miss is the crystal phasing. I wish the crystal filters in the
>SPR4 had phasing.
>
>73,
>
>Patrick
>
>Patrick Martin
>KAVT Reception Manager
>
>_______________________________________________
>IRCA mailing list
>IRCA@xxxxxxxxxxxxxxxx
>http://montreal.kotalampi.com/mailman/listinfo/irca
>
>Opinions expressed in messages on this mailing list are those of the
>original contributors and do not necessarily reflect the opinion of the
>IRCA, its editors, publishing staff, or officers
>
>For more information: http://www.ircaonline.org
>
>To Post a message: irca@xxxxxxxxxxxxxxxx
>
_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: irca@xxxxxxxxxxxxxxxx